Restoration of Chapel Window Frames & Shutters
Part 2: Windows Restoration
Rancho Camulos Museum


CHAPEL WINDOWS & SHUTTERS RESTORATION 2018

thumbnail

Part 1: Removal

thumbnail

Part 2: Restoration

In the summer of 2018, Michael Adams, "The Santa Paula Craftsman" (santapaulacraftsman.com, EPA Renovator Certificate No. RI22015-18-3058), restored the worn-out window frames and shutters of the chapel on the grounds of Rancho Camulos Museum. The chapel was built in the 1860s on order of Ysabel del Valle, matriarch of the family that owned most of the Santa Clarita Valley until 1865.

In this second video by his company, Adams walks us through his restoration of the window frames in his workshop on Highway 150 (Santa Paula Road).

The Restoration Project.

Windows:

  •  Remove the window/sash
  •  Fill the empty frame with a temporary wood panel
  •  Dispose of lead-contaminated dust, chips and debris, and dispose properly
  •  Take the window sashes to shop in Santa Paula
  •  Remove the paint and glazing from the sashes
  •  Remove glass
  •  Stabilize the cracked and rotted wood with 2-part epoxy
  •  Reinforce the frame while maintaining the integrity and feature of the original wood peg joinery
  •  Clean and polish the glass
  •  Replace the glass in the frame
  •  Apply modern points/fasteners to keep glass in frame
  •  Apply a high quality putty
  •  Seal/prime exposed wood with an oil-based primer or shellac
  •  Attempt to match original paint with a high quality water-based paint
  •  Ready for re-installation

Window frames:

  •  Position plastic to catch lead-based paint chips
  •  Remove old paint
  •  Stabilize the cracked and rotted wood with 2-part epoxy
  •  Reinforce the frame while maintaining the integrity and feature of the original joinery
  •  Seal/prime exposed wood with an oil-based primer or shellac
  •  Attempt to match original paint with a high quality water-based paint

Marrying frame and windows:

  •  Re-install windows/sashes
  •  Dispose of lead-contaminated dust, chips and debris, and dispose properly

Wood shutters:

  •  Remove the shutter
  •  Dispose of lead-contaminated dust, chips and debris, and dispose properly
  •  Take the shutter to shop in Santa Paula
  •  Disassemble shutter
  •  Remove the paint
  •  Stabillize the cracked and rotted wood with 2-part epoxy
  •  Remanufacture damaged parts as needed
  •  Reinforce the frame while maintaining the integrity and feature of the original wood peg joinery
  •  Seal/prime exposed wood with an oil-based primer or shellac
  •  Attempt to match original paint with a high-quality water-based paint
  •  Ready for re-installation

"Before" Photos:

RETURN TO TOP ]   RETURN TO MAIN INDEX ]   PHOTO CREDITS ]   BIBLIOGRAPHY ]   BOOKS FOR SALE ]
SCVHistory.com is another service of SCVTV, a 501c3 Nonprofit • Site contents ©SCVTV
The site owner makes no assertions as to ownership of any original copyrights to digitized images. However, these images are intended for Personal or Research use only. Any other kind of use, including but not limited to commercial or scholarly publication in any medium or format, public exhibition, or use online or in a web site, may be subject to additional restrictions including but not limited to the copyrights held by parties other than the site owner. USERS ARE SOLELY RESPONSIBLE for determining the existence of such rights and for obtaining any permissions and/or paying associated fees necessary for the proposed use.
comments powered by Disqus